Point, widely used in light industry, chemical industry, metallurgy, machinery, textile. Electronics industry automation equipment, a variety of accessories, to meet different installation requirements. 
With imported wires automatically wired in high temperature spot-welding craft, coil plug pins silver plated, 2000V high breaking voltage testing to ensure safety of solenoid valve use. Horizontal machining center, imported seals, specified imported grease, with professional production of solenoid plunger and special after-treatment, gives strong background for high quality. 100% guarantee from full-automatic testing
This series air units are with the same function as A series with bowl sizes from 2000 to 5000. Among these air treatment units, bowl sizes for 3000 and above air filter can be mounted with auto drain element Very popular especially for USA and Europe.
Home, Pneumatic Accessories
1). Pneumatic Fittings
1. Pneumatic Fittings, Air Fittings, Push-In Fittings
Push In Fittings - BSPT, R, NPT thread
Plastic push in fittings (pneumatic fittings, one touch tube fittings) are tapered thread, and there is special thread sealants on thread. Accept metric and inch tube, and BSPT (R), NPT thread. Working pressure range: 0~1.0Mpa (0~150psi), Working temp. range: 0~60ºC (32~140ºF).
BSPP, G, thread with O-ring
Pneumatic push in fittings with O-ring (BSPP thread one touch tube fittings) are parallel thread, so there is O-ring on the thread, by which sealing is very well, it's suitable for G and BSPP thread. Working pressure range: 0~1.0Mpa (0~150psi), Working temp. range: 0~60ºC (32~140ºF).
2. Compact One Touch Tube Fittings, Miniature Pneumatic Fittings
compact one touch fittings is 40% less and the outside diameter is 20% less than the standard type tube fittings. Working pressure range: 0~1.0Mpa (0~150psi), Working temp. range: 0~60ºC (32~140ºF).
3. Pneumatic Speed Controller Valve, Pneumatic Flow Controller Valve
Pneumatic speed controllers (flow controller) can regulate air flow to control the operational speed of pneumatic actuators. Accept metric and inch tube, and BSPT(R), BSPP(G), NPT thread.
4. Pneumatic Hand Valve, Air Hand Valve
Pneumatic hand valve can close or open airflow, when it closed, discharges the residual pressure from the output (device) side, there are tube to tube, thread (BSPT, BSPP, NPT thread) to thread and tube to thread etc. various type
5. Check Valve Fittings
Check valves permit airflow in one direction, Used for maintaining the output pressure at a constant level.
2). All Metal Push In Fittings
1. Nickel Plated Brass Air Fittings
BSPT, R, thread
The exterior structure of All nickel plated brass push in fittings with BSPT or NPT thread are all brass, they are more solid and more ageing resistance than plastic push in fitting, there is NBR sealing and stainless steel pliers
.png)
BSPP, G, thread with O-ring
All nickel plated brass push in fittings with BSPP thread have O-rings on their thread, parallel thread with O-ring to seal, Working pressure range: 0~1.0Mpa (0~150psi), Working temp. range: 0~70ºC (32~158ºF). Metric and Inch tube
2. Nickel Plated Brass Pneumatic Push In Fittings (Camozzi Type)
.png)
Camozzi type all metal push in fittints have different interior structure with common type brass push in fittings, sealing by o-ring not NBR, the lock claw and tube sleeve is on one body, Working pressure range: 0~1.6Mpa (0~230psi), Working temp. range: -20~120ºC (-4~248°F). BSPT(R), BSPP(G), NPT thread, Metric and Inch tube.
3. Push To Connect Air Brake Fittings (DOT Type)
.png)
Push Connect Air Brake Fitting (DOT Type) Ideal for use in transportation, instrumentation markets and pneumatic accessories, there is viton sealing inside, so it could work under high temp., Inch tube and NPT thread.
3). Brass Air Fittings
1. Nickel Plated Brass Air Connectors
Brass Air Connector with Nickel Plated (pneumatic brass fittings) are used in air, water, and other fluid field, the material is brass with nickel plated, accept custom made for specail size. There is BSPP(G), BSPT(R), and NPT thread.
2. Compression Fittings
Compression fittings are used to connect two pipes. They are composed of three pieces: a body, nut, and gasket ring (or ferule). They use pressure to tighten connections, which prevents leakage.
3. Rapid Fitting for Plastic Tube, All Metal Two-Touch Fittings
Rapid Fittings for Plastic Tube ( All metal two-touch fittings) are Lock-nut mechanism provides a semi-permanent pneumatic connection. Resistant against vibration and suitable for multi-directional tubing movements. BSPT, NPT thread.
4). Air Tubing
1. Polyurethane tube, PU tubing
Inch and metric tubing sizes available, there is Straight Polyurethane pneumatic tubing, Coiled Polyurethane Tubing, accept within or without quick coupler and air connectors.
Straight Nylon 6 Tubing and Straight Nylon 12 Tubing, meet SAE J844 standard, air brake hose, DOT air line, high Bursting pressure and minimum bend radius.
5). Air Pressure Gauge
6). Air Blow Guns
it is also called air blower, which is often used to clean the dust , water and crumb. We have made research on the new type of the plastic air gun based on the traditional one. The new one is very convenient with the spring. It is very popular in the market.
7). Pneumatic Silencers, Air Muffler
As air passes through the pneumatic silencer ( Muffler), the dense felt element absorbs the noise, thus reducing high pitch exhaust noise to a gentle, low frequency sound. Material: Plastic, Brass.
Products Search
Pneumatic cylinder, air treatment units, FRL, solenoid valve, Air directional valve, pneumatic valve, air control valve, air filter, Air Filter Regulator, Air Lubricator, Air Regulator, Flow Control Valve, Quick Exhaust Valve, Foot Valve, Hand Valve, Standard Cylinder, Mini Cylinder, Compact Cylinder, Double Shaft Cylinder, pneumatic fittings, pneumatic push in fittings, all metal air fittings, DOT push to connect air brake fittings, one touch tubing fittings, all brass air fittings, pneumatic connectors, PU tubing, PA tubing, silencers, pressure gauges, air blow guns, air cylinder accessories, PU tube, pneumatic fitting, pneumatic component, Air cylinder.